How to Install Prefab Zero Clearance Fireplace Doors – BrickAnew


(text on screen): www.Brick-Anew.com, No Hassle Returns, Satisfaction Guaranteed, Since 2001, 800-897-7175 First, you’ll mount the brackets to the back of the frame. Typically, your screws come screwed into the tinnerman. Simply unscrew, then insert the screw into the hole of the bracket and fasten the bracket to the back of the frame. The appropriate brackets are included for each individual zero clearance fireplace. Once you have the four brackets installed (two on each side), the frame is ready to install into the opening. This typically would be going into a metal box, so we will use the self-tapping screws. Make sure your frame is even. Now it’s ready for your set of doors. (text on screen): Putting the Doors into the Frame Here’s how to install the FS2 doors into the frame. First, insert the bottom pin into the bottom clip. Then, tilt the door until you can get the top pin into the top clip. Now, we’ll do the right side. If your installation is a bit off at the bottom, simply loosen a screw in the bracket of the frame. Move the frame in or out to the proper location and retighten the screw. (text on screen): www.Brick-Anew.com, No Hassle Returns, Satisfaction Guaranteed, Since 2001, 800-897-7175

3 thoughts on “How to Install Prefab Zero Clearance Fireplace Doors – BrickAnew

  1. This heater is gorgeous fireplace >>>t.co/P2fS57pTEC ! It has every setting you could possibly want from changing the "fire" to changing the temperature. Remote feature is great when you get to warm in bed and need to turn it down. Has wheels so it's easy to move around if needed. The BEST part though is the sleep timer. No more waking up in the middle of the night sweating because it's too hot!

Leave a Reply

Your email address will not be published. Required fields are marked *